Skip to content Skip to sidebar Skip to footer
Home / Some Files Necessary for Setup Are Not Installed Run Setup Again From the Software Cd rom Epson 420

Some Files Necessary for Setup Are Not Installed Run Setup Again From the Software Cd rom Epson 420

Post a Comment

User Manual - Table of Contents

  • Introduction and Setup
    • System Requirements
    • Setup Primary Machine
      • Run the spacedesk Driver Installer
      • Verify if Setup was Successful
      • Verify if latest version is installed
    • Setup Secondary Motorcar
      • Install on Android and iOS Smartphones and Tablets via App Store
      • Install on Windows PCs, Laptops and Surface Tablets
      • Run on any Machine in HTML5 Web browser
  • Configuration and Settings
    • Viewer Device (Secondary Machine)
      • Mouse, Keyboard, Touchscreen And Pen Input
      • Audio Speaker
      • Screen Resolution
      • Automated Connect
      • Full Screen Upon Connect
      • Auto Rotation
      • Keep Monitor Active
      • Automobile-Start Windows Viewer
    • Windows PC (Principal Machine)
      • Desktop Extension or Desktop Duplication (mirror) Settings in Display Control Panel
      • Desktop Extension or Desktop Duplication (mirror) Settings in Display Switch
      • Set as Primary Display
      • Disable spacedesk
  • Connecting a new brandish monitor over the network
    • Network Discovery
    • Establishing The Network Connexion
    • Verify Network Connection and additional Display Monitor
  • Video Wall Configuration
    • Videowall
    • Settings
      • Wall Display Settings
      • Client Brandish Settings
    • Video Wall Functioning
  • TROUBLESHOOTING
    • Disquisitional Errors
      • Windows ten Crash with BSOD (Blue Screen of Death)
      • Black Screen on Principal Monitor
    • Known Issues, Problems and Limitations
      • Incompatible Third Political party Products
      • Windows 10 Desktop Duplication (mirror) option not bachelor
      • Windows ten onetime version not supported
      • Windows 8.i Limitations and Unsupported Features
      • Windows 8.i Crash upon client connect
      • Windows 10 Known Problems and Unsupported Features
    • Network Connexion
      • Cannot discover Main Machine
      • Connection Error
      • Firewall Settings on Primary Machine
      • VPN (Virtual Private Network)
    • Windows PC (Chief Machine)
      • spacedesk Server Status
      • Incompatible Brandish Hook Commuter Detected
      • Repair spacedesk Driver Setup
      • Various
    • Viewer Device (Secondary Machine)
      • Check Viewer App version
      • HTML5 VIEWER
      • Connection Error
      • Limitations
  • Performance Tuning
    • Network Router
    • Network Bandwidth
      • Wifi Straight / Wifi Hotspot / Wifi Access Point
      • USB Tethering
      • Network Cable
      • Android Debug Bridge Cablevision
    • Screen Resolution
    • Color Depth and Image Compression
    • Framerate per 2d
  • Uninstall on Windows Chief Machine
    • Uninstall Using Windows Control Panel
    • Uninstall Using .Msi File
    • Troubleshooting Uninstall
    • Manual Uninstall (Troubleshooting Only)
    • Windows Secondary Machine Uninstall
  • Appendix
    • Release Notes
    • List of Incompatible Windows Awarding
    • File Listing

Introduction and Setup

At to the lowest degree 2 machines are needed to operate spacedesk. These machines must exist connected via a Local Surface area Network (e.g. Ethernet or Wireless) supporting TCP/IP network protocol. Each one of the ii machines is running its ain kind of  spacedesk software:

1. The Primary Machine runs the spacedesk Commuter software. It includes network brandish server software and display device drivers. This allows to extend or duplicate the Windows Desktop to the screen of some other automobile over the network.
• Windows PC
• Laptop
• Surface Pro tablet (Windows Desktop application)

2. The Secondary Automobile runs spacedesk VIEWER software which acts every bit the secondary brandish. Information technology tin be one (or multiple) of the following:
• Android tablet or phone (Android VIEWER)
• Windows PC, laptop or Surface Pro tablet (Windows Desktop application)
• Apple tree Mac, iPad or iPhone (iOS VIEWER)
• Linux PC and a variety of other machines (HTML5 VIEWER)

3. The Network Connection in between can be straight or through router/switch/access indicate connected by cable or wireless.  It tin can be one or multiple of the following:
• Ethernet crossover cablevision direct connection (best performance)
• Ethernet cable through router/switch/hub (good performance)
• WiFi direct connection to Access Point (intermediate performance)
• USB Tethering  or USB to Ethernet (intermediate operation)
• WiFi through router/switch/hub (worst performance)

System Requirements

Primary Windows Machine (network display server)

The spacedesk server runs a Windows service and the WDDM Display Driver which is visible to Windows simply as an own separate virtual graphics adapter (Windows 10) or as boosted virtual brandish monitors on the master graphics adapter (Windows 8.1). These additional virtual displays can mirror the main screen or extend the Windows Desktop. spacedesk Commuter software is capturing their screen content, compressing it and transmitting it over the LAN (Local Area Network) to the spacedesk VIEWERs.
 • Windows 11 / 10 (version 1607 – later only) / 8.ane
 • Graphics adapter Nvidia / AMD / Intel / Basic Display
 • WDDM 3.0 / two.7 / 2.6 / 2.5 / 2.four / 2.iii / 2.2 / ii.1 / two.0 / 1.3 / 1.two / 1.ane
 • DirectX 12/xi/10/9

Secondary Machine or Device (network brandish client)

Android VIEWER on tablets and phones.
 • Android (> version 4.1)

iOS VIEWER on iPhones, iPads and iPod bear on
 • iOS (> version nine.3)

Windows VIEWER on Windows PCs, laptops and Surface.
• Windows 11 / 10 / 8.i / 7
• DirectX 10
• DirectX WARP (Min. 800 MHz CPU / Min. 512MB RAM)

HTML5 VIEWER on any device running operating arrangement with HTML5 Spider web browsers
Chrome (> xvi), Safari (> v.one) Net Explorer (> ten), Opera (> 27) e.k.:
• Windows Phones (Windows Telephone ten / viii.1)
• Windows Surface, tablet, laptop and PC (Windows x, 8.1, 8, 7, Vista, XP)
• Mac (OSX)
• Linux PC and laptop

Network Connection

Network  needs to run TCP-IP protocol.

Setup Primary Car

Before installing a new spacedesk version, uninstall whatsoever previous version. This can be done on Windows Control Console → Programs and Features.

Run the spacedesk Commuter Installer


For Windows ten/11:
spacedesk_driver_Win_10_32_v1040_BETA.msi for 32-bit platform
spacedesk_driver_Win_10_64_v1040_BETA.msi for 64-bit platform

For Windows eight.ane:
spacedesk_driver_Win_8.1_32_v1036_BETA.msi for 32-flake platform
spacedesk_driver_Win_8.1_64_v1036_BETA.msi for 64-bit platform

Make certain to cheque the Firewall configuration before proceeding otherwise no client will be able to discover this Primary Machine nor connect to it.

Just on Windows 8.1 the dialogs below will exist shown and demand to be confirmed. These operating systems, also require a reboot after the setup has completed.

Verify if Setup was Successful

First, make sure that the spacedesk Commuter is properly installed and can be seen underneath Programs and Features.

Check if the spacedesk Arrangement Tray icon (at the lesser right of the screen) is visible in the notification area and click information technology to show spacedesk status ON in spacedesk Commuter Console app.

Check the Windows Firewall settings if spacedeskService.exe is allowed on private or public network. Open up Control Console → Windows Firewall → Allow an app through Windows Firewall, allow an another app then scan for spacedeskService.exe located at "C:\Windows\System32" folder.

Verify if latest version is installed

Check spacedesk version past right-clicking the spacedesk System Tray icon (at the bottom right of the screen) then click About to evidence the spacedesk SERVER About window displaying the current version.

Then compare this version with the website's current spacedesk version.

Setup Secondary Machine

Install on Android and iOS Smartphones and Tablets via App Store

Android VIEWER is installed from the Google Play Store and iOS VIEWER is installed from the iTunes App Store.

Install on Windows PCs, Laptops and Surface Tablets

A Windows PC, laptop or Surface tablet can exist used as Secondary Motorcar. spacedesk Windows VIEWER needs to exist downloaded from the

spacedesk website. It needs setup and installation equally shown below.

Run the spacedeskWindowsVIEWER setup installer, spacedeskWindowsVIEWER_v0930_BETA.msi. Later on a successful installation of Windows VIEWER application a shortcut is created on the desktop.

Run on any Machine in HTML5 Spider web browser

For spacedesk HTML5 VIEWER, no setup installation is needed on the Secondary Machine. HTML5 VIEWER operates with a standard web browser without any setup needed upfront. It tin exist opened directly from the website http://viewer.spacedesk.net/. Make certain that the web browser (e.grand. Safari, Google Chrome, Opera, Internet Explorer, etc.) is updated to the latest version.

It is important to understand, that spacedesk HTML5 VIEWER does not operate over the internet. It does non need an cyberspace connectedness. It does non even need to exist opened over the internet as described above. The HTML5 page tin can be saved locally.

Local install (optional):The web folio can be saved to exist used off-line fifty-fifty without internet connection. Follow the instructions below:
• Refresh using Ctrl-F5 keys after opening HTML5 page (this ensures that everything is updated).
• For Google Chrome browser, use the the carte du jour "More tools " and select "Create shortcut… ".
• For Microsoft Internet Explorer browser, apply the the bill of fare "Tools " and select "Add site to apps "

Configuration and Settings

Viewer Device (Secondary Automobile)

Below a few configuration settings to adjust spacedesk operation to private needs.

Mouse, Keyboard, Touchscreen And Pen Input

To enable the "Mouse, Keyboard and Touchscreen " choice:
Windows 7 VIEWER → Functionality menu.
For touchscreen, two options are available accented and relative mode.
Touchscreen (absolute) style provides an absolute input position of the mouse pointer within your viewer screen.
Touchpad/Trackpad (relative) mode is using relative desktop coordinates.
To leave from remote control mode just press "Alt+Shift" central combination.

Windows 10 VIEWER App → Settings → Remote Command card.
Mouse output tin can be set as the actual mouse or equally emulated touch.
Touch output can be set every bit actual Bear on or as emulated Mouse.
Keyboard and Pen tin be activated or deactivated.
To exit from remote control, you can ready a custom key combination. The default key combination is "Alt+Shift".

On Android and iOS VIEWER app, touch screen, Keyboard and Pen remote input feature is also supported.
 It can be enabled on Settings → Input devices.
(Android)

(iOS)

At that place are ii different options on how touch on characteristic tin work on Android and iOS device.
 • Absolute touch provides an absolute input position of the mouse pointer.
 • Relative touch which works like a touch pad.

Keyboard remote control can be activated/deactivated.
For software keyboard on Android VIEWER app, just do the two finger touch on on the viewer screen to actuate the onscreen keyboard.
Hardware keyboard is besides supported (USB or wireless).
Pen remote command tin can be activated/deactivated too.

On HTML5 VIEWER, just go to Advanced Operation Settings → Remote Control to enable remote command feature. Yet, no keyboard control simply mouse and touchscreen support.

Below are the touch gestures for Android and HTML5 Viewer:
 Motility pointer: Tap with one finger and elevate anywhere on the screen.
 Left-click: Tap the screen with 1 finger
 Right-click: Tap and hold the screen, so release.
 Elevate Windows/Object: Tap two times for relative OR tap once for absolute, hold and then drag.

Audio Speaker

Current spacedesk Android and Windows 7 Viewer apps already supports remote Audio.

To enable in spacedesk Android Viewer app, make sure to enable first the on-screen bill of fare.
Upon spacedesk connect, Sound can exist enabled/disabled via On-Screen carte.

To enable in spacedesk Windows seven Viewer app, click the Functionality -> Audio Speaker (experimental) before spacedesk connection.

Screen Resolution

The "Resolutions" dialog box of the Windows VIEWER Settings allows the users to use up to two resolutions. The customer's native resolution tin can be enable and employ by checking the box of "Native Screen Resolutions".Then the user can also add together another resolution past selecting one of the typical screen resolutions on the combo box.

Automatic Connect

The "Automated Connect" pick of the Windows and Android viewer's Settings allows the user to enable the automatic connect to IP address (of multiple chief machines) or hostname upon launching the viewer app and besides an selection to "Auto-reconnect" to the last server machine connected in case of sudden disconnection from system sleep or hibernate or from any kind of unwanted disconnection.

(windows viewer)

(android viewer)

(iOS viewer)

Full Screen Upon Connect

The "Full screen upon Connect" selection on Windows VIEWER Settings will enable the automatic switching to full screen way upon connecting to the server.

Auto Rotation

The "Auto rotation" option on iOS and Android viewer settings allows users to enable an automatic rotation of viewer screen according to current brandish orientation (eg Portrait or Landscape manner) of iOS / Android device.

(android)

(iOS)

Keep Monitor Active

The "Keep Monitor Active" option on Windows VIEWER Settings will preclude the secondary machine's monitor from going to Display Off or System Sleep only when Windows VIEWER is connected to the server.

Auto-Start Windows Viewer

To set the spacedesk Windows VIEWER app to automobile start during Windows start upwardly:
 • open the run command (Window + R key combination),
 • paste "% appdata% \ Microsoft \ Windows \ Outset Card \ Programs \ Startup" then enter,
 • on the Startup folder just re-create the spacedesk Windows VIEWER shortcut file found on your desktop.

Windows PC (Primary Machine)

Desktop Extension or Desktop Duplication (mirror) Settings in Display Control Panel

Right Mouse Click on Desktop → context menu "Display settings" leads to Display Command Panel. Display Control Panel can exist used to change display resolutions and to verify proper operation. During Desktop Extension the post-obit status should be shown:

During Desktop Duplication (Mirror) the following status should be shown:

During Single Output (Second Screen Only) the following status should be shown:

Desktop Extension or Desktop Duplication (mirror) Settings in Display Switch

Display Switch (Windows logo + P) can also be used to change modes

Ready as Primary Display

Setting the spacedesk brandish as primary/main display tin be done by selecting the display then underneath Multiple displays dropdown list, there's a check box "Make this my main brandish".

Disable spacedesk

Disabling the spacedesk server temporarily to prevent other spacedesk client connectedness tin can be done via spacedesk Commuter Panel user interface → Control → spacedesk Status, toggle OFF for Windows 10-eleven primary motorcar.

Via spacedesk SERVER window User Interface → Settings → OFF for Windows 8.1 primary machine.

Connecting a new display monitor over the network

Network Discovery

spacedesk secondary machines (except HTML5 VIEWER) can do automatic network discovery of Primary Machines.

Only when using HTML5 VIEWER or in case the Master Machine cannot be discovered, the IP address of the Main Machine needs to be entered manually. Information technology can be determined in various ways:

• Click the spacedesk System Tray icon (at the bottom right of the screen) OR the spacedesk Driver Console icon on the Windows Start bill of fare to display the spacedesk DRIVER Panel user interface.


(for Windows 10-11 primary machine)


(for Windows 8.1 primary car)

• Typing ipconfig in a Windows control prompt.

Establishing The Network Connectedness

Android / iOS / Windows Viewer
On the client side, initiate connection to server past opening the spacedesk VIEWER app and select the desired server on the listing of detected primary machines to automatically connect. If Primary Machine cannot notice, delight cheque the chapter Troubleshooting Network Connection – Cannot Detect Primary Auto below.

HTML5 Viewer
Using the updated web browser, go to HTML5 viewer folio then blazon the IP address of main machine where the spacedesk DRIVER is installed. The "Demand Help?" push below the Connect button provides an instructions on how to get the IP address of server automobile and then click the "Connect" button to start the connexion.

Verify Network Connection and boosted Display Monitor

On the Main Machine side, check if the connection is established. Just click the spacedesk Organization Tray icon (at the bottom right of the screen) on the main machine to brandish the spacedesk Driver Console window -> Connections Active (continued) folio and on Adapter Interface -> current Network Adapter -> Active Connections.

Open Brandish Command Panel via spacedesk Tray icon, correct-click -> Windows Display Control Console bill of fare then cheque if there's a secondary brandish attached.

Video Wall Configuration

Videowall

Footstep 1: Open spacedesk Driver Panel window by clicking the spacedesk Tray icon or search "spacedesk DRIVER Console" in Windows Start Card.

Step 2: Enable/Disable Videowall functionality using the toggle switch in the spacedesk DRIVER Console – CONTROL – Videowall Configuration box.

Settings

Wall Display Settings

Updating the wall brandish'southward settings will take effect immediately upon pressing the enter on each text box.
Size (Width:Superlative) – The (Width 10 Height) screen resolution of the video wall. By default, Video wall display is prepare to 4K screen resolution (3840 10 2160).

Client Display Settings

Updating the client display's settings will take event immediately upon pressing the enter on each text box.
Wall Index – employ to create new Video Wall or assign to an existing Video Wall.
Size (Width:Top) – The Width x Height / screen resolution of the client brandish.
Position (X;Y) – The (X : Y) position/coordinates of the client display. By default, both are gear up to 0.
This settings is merely practical on the client displays assigned in a Wall.
Rotation Angle – Bending in degrees of the client display. Past default, it is set to 0.
This settings is merely applied on the client displays assigned in a Wall.
SubSampling blazon – The colour depth type of the customer display epitome. By default, information technology is set to 4:2:0.
For more info delight cheque Color Depth and Epitome Compression chapter.
Framerate – The frame charge per unit per second (FPS) of the client display. Past default, information technology is set to 30 fps.
Dissimilarity – slider settings to adapt the client display image's contrast. By default, it is set to 0.
Brightness – slider settings to arrange the client display image's brightness. By default, information technology is set to 0.
Compression Quality – slider settings to conform the client display image'south quality. By default, it is set to seventy.
Flipped Display – check box will enabled the inverted/flipped display which usually used for mirroring.

Video Wall Operation

Step ane: Create a Video Wall Display
For first time client connection, the display is set as Extension mode.
To create a Video Wall, but assign a value (e.g. 0) in the Wall Index text box of each client display.
Just press the enter key to update the settings and it will automatically plugged a video wall display (eastward.one thousand. Wall0).

Stride 2: Assign multiple clients to Video Wall
Multiple customer display can be assigned to the video wall by assigning it on the Wall Index text box or via right click context menu "Assign to WallX".
User tin can also create multiple video walls simultaneously as long as the master machine's resources tin can handle it.

Step 3: Creative Video Wall
Creative video wall involves rotated client displays and/or positioned in a non zero Ten and Y coordinates.
Below are the sample creative video wall settings.

Sample #1: Video Wall0

Sample #2: Video Wall1

Pace four: Mirroring to multiple customer displays
This video wall configuration can also be used to mirror/duplicate a desktop screen into multiple customer displays, past assigning multiple clients in one video wall with the same X and Y coordinates and simply change the video wall's dimension to the aforementioned dimension of the client displays.

TROUBLESHOOTING

Critical Errors

Windows ten Crash with BSOD (Blueish Screen of Decease)

In some cases, when spacedesk is continued over USB tethering connection, the USB commuter used by USB tethering network causes a BSOD crash.
Please try to update the Windows USB commuter via Windows Update.

Black Screen on Main Monitor

When changing Windows to multimonitor configuration, then sometimes the main display monitor remains discrete from the Windows Desktop. Such "Black screen Problems" sometimes happen on all Windows displays. East.g. this also happens sometimes when working with projectors. This situation tin can unremarkably be solved hands by changing Windows projector settings using "Windows Central + P" (where P stands for projector). Just repeat this key sequence: "Windows Key + P" "Pointer Downwardly" "Enter".

Known Issues, Problems and Limitations

Incompatible Third Party Products

Incompatible products:
Nvidia ShadowPlay
Wired XDisplay (splashtop)

Windows x Desktop Duplication (mirror) option non available

Desktop duplication of chief monitor to other displays is disabled in Windows display settings of Windows x with one-time version of graphics adapter (< WDDM 2.0). Just download the latest commuter version from its website OR if it did not piece of work try to downgrade the graphics driver to Microsoft Basic Display commuter via device director.

Windows 10 quondam version not supported

Latest spacedesk Windows 10 Driver version at present but supports Windows 10 version 1607 and above. Just run "winver " to check Windows x version. If the version is older than version 1607 (Build 14393) merely upgrade to Windows ten version 1607 or in a higher place, in order to utilise the latest spacedesk driver. Use Windows 10 Update Assistant to upgrade Windows 10 to latest version for free, just click here…

Windows 8.1 Limitations and Unsupported Features

Multi-GPU Applied science such as Nvidia SLI Engineering or AMD Crossfire is currently not supported by spacedesk. In example SLI is enabled, spacedesk volition not work properly.
Virtual machines are officially not supported past spacedesk driver for Windows 8.one Chief Machine. It may work on some cases only some problems may occur such as strange mouse pointer beliefs, black screen on client, etc.
Nvidia Control Panel crash may also observed while spacedesk is agile on Windows 8.ane Primary Machine.
qWave (Quality Windows Audio/Video Experience) Windows Feature unavailable message box during installation may observed on Windows Server 2008/2012 primary machine. To install this feature, Open Server Manager -> Add Roles and Features, merely click Side by side until you are on the Features, and then check if the box for Quality Windows Sound Video Experience (qWave) features is checked, and if not please check it and install.Then restart your server machine (if required).

Windows 8.1 Crash upon client connect

In very rare Windows 8.i environments a BSOD crash (Blue Screen of Decease) tin happen upon connect. Such a organisation crash is always recoverable because the driver is not yet active during Windows eight.one system boot time.
Just reboot the primary car in safemode and then uninstall the spacedesk driver. To boot in safemode, press and hold f8 key upon estimator reboot and before the windows logo appeared. Then in advanced boot option screen use the arrow keys to select the safe mode option then press Enter key.

Annotation: Earlier uninstalling using the spacedesk msi installer on safemode, run a Command Prompt and then type the following commands:
Step 1:
for Safemode: REG ADD "HKLM\Organization\CurrentControlSet\Control\SafeBoot\Minimal\MSIServer" /VE /T REG_SZ /F /D "Service"
for Safemode with Network: REG ADD "HKLM\SYSTEM\CurrentControlSet\Control\SafeBoot\Network\MSIServer" /VE /T REG_SZ /F /D "Service"

Step two: net start msiserver

Windows x Known Issues and Unsupported Features

Nvidia ShadowPlay – Electric current spacedesk version has a known upshot with Nvidia ShadowPlay. While Nvidia ShadowPlay (screen record) is active, spacedesk will give an mistake code 1-2-0 on the viewer side. Just disable it in order to use spacedesk.
Night Calorie-free – Windows Night Lite settings is currently not supported on spacedesk displays.

Network Connection

Cannot discover Primary Machine

Step 1: Different Network Segments

If Primary Machine and Secondary Machine are in unlike network segments, then they cannot detect each other. However, they may still be able to connect. In that case try to add the IP address to observe the chief machine by clicking the " + " push button.

To get the IP address of the Primary machine please check the above chapter Establishing the network connection .

Step ii: 3rd party firewall software

In case the above steps did non help, then a third party firewall software (other than Windows Firewall) could still forestall detection. Please check this chapter'due south paragraph " Firewall Settings " below.

Pace three: WiFi router's network isolation active

In example all above steps withal did not help, and if this is happening on a wireless network, then there might be one other remaining problem: WiFi router's network isolation feature might be activated. The only solution for this is re-configuring the router.

Step 4: VPN (Virtual Individual Network) enabled

Just refer to the VPN topic beneath.

Step 5: Culling ways to connect

If all above connection attempts failed. Try USB Tethering or Wifi Straight / Hotspot setup to found a network connection between Primary and Secondary machines.

Connexion Error

This shows that the chief automobile tin can be reached over the network but connexion fails subsequently the indicated connectedness time. Possible reasons are the post-obit:

– Unstable network connectedness
– Error on spacedesk Primary Machine
– Nvidia ShadowPlay (screen record) is running which is a known issue at the moment.
– Virtual Individual Network (VPN) enabled

Firewall Settings on Primary Machine

Third party firewall

If there is a third-party firewall software or anti virus (eg Avast, AVG, etc.) with own firewall settings running on Primary Machine, then this tin can prevent spacedesk discovery and connection.

Delight ensure that C: \ Windows \ System32 \ spacedeskService.exe is immune through the firewall software or the spacedesk TCP / IP network protocol port is opened. spacedesk is using TCP port 28252.

Windows firewall

Please ensure that the Windows Firewall settings is correct. For details please cheque chapter Setup Primary Auto – Verify if setup was successful .

VPN (Virtual Individual Network)

On some situations, having a VPN connection present on either primary or secondary machine prevents the network discovery procedure between spacedesk server and client, which results to "Cannot Detect Primary Machine" or "Error code 1-0" in spacedesk viewer apps.
At that place are diverse workaround that tin gear up this problem without completely disabling the VPN connection.
1. If VPN app has user interface with configuration settings that will let users select a specific apps to not use VPN, just add the C:\Windows\System32\spacedeskService.exe on this exception list.
ii. Run "ncpa.cpl", right-click the Ethernet or WiFi network icon so open up the Properties window. Click on the Sharing tab and check the "Allow other network users to connect through this computer's internet connection" box.

Windows PC (Primary Car)

spacedesk Server Status

Cheque if spacedeskService is operating. Make sure that spacedesk service has started and spacedesk System Tray icon (at the bottom right of the screen) is visible in taskbar'south notification area and turned ON. For details, please check chapter higher up Setup Primary Machine – Verify if Setup was Successful .

Server OFF or Mistake

spacedesk server can be enabled and disabled via spacedesk server user interface bill of fare. In case viewer app cannot discover / connect to the server, brand sure that this card is ON.
spacedesk server tin be in Fault state if spacedesk Graphics Adapter in device manager has yellow exclamation mark which indicates an mistake in driver. Bank check in C: \ Windows \ system32 \ drivers \ UMDF directory if "spacedeskDisplayUmode1_x.dll" is present so effort to disable-enable the driver in device director and try to switch ON in spacedesk server user interface menu.

For Windows eight.1 primary motorcar, check for "spacedeskHookKmode.sys" in C: \ Windows \ system32 \ drivers directory, so reboot.

For Windows 10 (version 1607 – later) main automobile, open Device manager and check below Display Adapters if spacedesk Graphics Adapter is installed correctly and enabled.

Incompatible Brandish Claw Driver Detected

Step 1: Check if organization tray bubble reports incompatible display hook driver

This fault message indicates that another WDDM filter hook display driver is nowadays on the system.

The specific display hook driver  can be make up one's mind via spacedesk Driver Console app -> DIAGNOSTICS -> Incompatible Software.

Step 2:Uninstall known products using incompatible display hook drivers

This is usually installed by a USB-Brandish or Zero-Client of the following brands:

Display Link, Duet Display, Fresco Logic, MCT, Microchip/SMSC, OSBase, Splashtop XDisplay and Extended Display HD, etc.

Display claw drivers are not standard Windows drivers. All products relying on such drivers are incompatible with each other. They cannot coexist on the same system. This includes spacedesk.

Apply the Uninstall push button on the spacedesk Driver Panel app to uninstall the other production / hook driver detected, and so reboot the spacedesk server motorcar and try to connect spacedesk customer once again.

Pace 3:Check if incompatible products did not uninstall OSBase commuter

Various products using the OSBase driver practise not properly remove it upon uninstall (e.thousand Duet Display, Fresco Logic, etc.). After uninstalling their product, the leftovers of the OSBase commuter still need to be removed manually post-obit the instructions beneath:

  • Go to Control Panel -> "Add Remove Programs ". If yous can find OSBase display driver software, uninstall it.
  • Bank check if OSBASE drivers are installed by running the following commands:
    • "sc query ddkmd "
    • "sc query ddkmdldr "
    • "sc query ddmgr"
  • If installed, uninstall OSBASE drivers by running the following commands:
    • "sc stop ddmgr"
    • "sc delete ddmgr"
    • "sc delete ddkmdldr"
    • "sc delete ddkmd"
  • Reboot your PC.

Repair spacedesk Driver Setup

Installation repair tin can be done by running the same msi installer version then select Repair push. Or just go to Windows Command panel → Programs and Features then search for spacedesk Driver, right-click so repair. This process only applies for Windows 10 master machine only.

Diverse

Detached Second Display.

In case of gray or blackness screen in Windows desktop awarding or e'er connecting condition on HTML5 VIEWER or "Brandish OFF" message showing in Android/iOS VIEWER, click the spacedesk Server window on the task bar and bank check if status of the device on Network Connections (remote) tab is "discrete" then open the windows display settings of the server machine. Simply select "Brandish Settings" in spacedesk Server window carte button so endeavour to attach it past selecting extend or duplicate.

Mirror manner failed.

For Windows 8.1 chief machine, if desktop extension is working but duplication is ever failing, make sure that the "Settings → Resolutions → Other Screen Resolution" of Windows VIEWER OR the "Advanced Performance Options → Custom Resolution" of HTML5 VIEWER OR the "Settings → Resolution" of Android VIEWER, OR Settings → Display → Custom Resolutions of iOS VIEWER should matched the native resolution of the principal machine'south monitor.

For Windows x, if indistinguishable option is not bachelor in Brandish settings try to update the graphics adapter past Windows Update or manual download of driver from official website.

If duplication is still not bachelor after driver update, then information technology's probably considering the driver does not back up mirror mode anymore. Delight refer to Known problems chapter below for Mirror mode non supported.

Articulate All Display Settings.

In case display is in wrong settings (orientation, screen resolution, display discrete) upon customer connect, try the "Clear All brandish Settings" option in spacedesk Organization Tray menu.

Viewer Device (Secondary Auto)

Check Viewer App version

Brand certain that the VIEWER version is updated. To cheque just open the Settings → About of Android / iOS / Windows viewer app. While in HTML5 Viewer page, current version is displayed on the folio below. And so compare the version on the viewer to the electric current version on the spacedesk website.

HTML5 VIEWER

Stride ane: Delete cached files, images and cookies of web browser.

If spacedesk HTML5 VIEWER spider web page doesn't load the latest version 0.9.10, only delete the cached files, images and cookies on browsers settings.

Step 2: check if the web browser supports websockets.

If the spacedesk HTML5 VIEWER is unable to connect, check the version of the spider web browser and make sure that it is updated. If the secondary machine is a smartphone or tablet device the browser and Os needs to be most recent versions supporting websockets. But become to https://websocketstest.com/ to verify.

Connection Error

Mistake Code: 1 & Fault Info: 0

This error code and info indicates that the viewer cannot find the Windows server on the network. Mostly, this is caused by Virtual Private Network (VPN) enabled on the main automobile. For more details, kindly refer to the Troubleshooting Network connection – Connection Mistake chapter in a higher place.

Error Code: 1-2-3 & Error Info: 0-3-v

This error indicates that the main auto can exist reached over the network merely connection fails after the indicated connection fourth dimension. Check the Connexion Error chapter discussed above.

(android) (iOS)

These error bulletin box also shows the connected time, it indicates how long the viewer is connected before information technology disconnects. And in case procedures did non assistance, but written report this error code sequence to spacedesk support.

Limitations

Custom Screen Resolutions

On iOS and Android viewer, custom screen resolutions available on settings are only those non bigger than the device'due south native screen resolution. This is due to the black screen problem observed when switching to higher resolution. On Windows and HTML5 viewer'southward Settings → Resolutions… → Other/Custom Screen Resolutions, supported resolutions is upwardly to 4096×2160.

Functioning in HTML5 VIEWER

HTML5 VIEWER is much slower than native viewer apps on Android, iOS and Windows. This is due to technical limitation of HTML5/Javascript.

Slow screen update on Windows VIEWER.

There are some cases that the rendering of screen update in Windows VIEWER is very wearisome. I of the possible reason is that Windows customer machine merely has a DirectX 9 graphics driver. It is recommended to upgrade to DirectX ten – above graphics driver to achieve better performance.

Multiple Display

Equally of now, spacedesk supports simultaneous connexion of up to sixteen additional displays.
– Up to xvi Android, or iOS, or Windows VIEWERs
– One HTML5 VIEWER spider web browser application for any device and operating system e.g. Mac Bone Ten and Linux

HTML5 VIEWER on Mozilla Firefox and Microsoft Edge not supported.

spacedesk's HTML5 VIEWER is currently not supported in Mozilla Firefox web browsers due to performance limitations. Please use other web browsers recommended in system requirements chapter.

Performance Tuning

The following variables are influencing display performance:

  • Network router
  • Network bandwidth
  • Screen Resolution
  • Color depth and Image pinch
  • Frame charge per unit per 2nd (FPS)

Network Router

The network router is the heaviest functioning restraint. Cirumventing routers substantially improves performance. This can be done in various ways:
– On wired networks, just apply crossover cables.
– On wireless networks use WiFi Direct (see paragraph below).
– USB Tethering (encounter paragraph below) has about the same performance as WiFi Direct.

Network Bandwidth

Wifi Direct / Wifi Hotspot / Wifi Access Betoken

Performance on wireless networks can be improved past configuring the Windows 10 PC/laptop or the mobile device equally Wifi Hotspot / Wifi Access Point. Connectedness to this Access Point needs to be established before connecting spacedesk.

To configure the Mobile Hotspot pick on Windows 10 PC/laptop. Simply get to Start → Settings → Network & Internet → Mobile Hotspot, and so plow it ON. Endeavor to connect the client device(phone/tablet/laptop) to the wireless network name generated by the Mobile Hotspot. Then run the spacedesk VIEWER and connect to the IP address of server machine, in this case it should be the IP address of the Mobile Hotspot network generated (Microsoft Wi-Fi Direct Virtual Adapter).

USB Tethering

If the secondary machine is a smartphone or tablet that supports USB tethering, utilize the USB cable to establish a network connectedness betwixt primary and secondary machine. USB tethering typically supported on devices with Cellular Network.

For Android device just go to settings and discover the Tethering & portable hotspot, then connect the USB cable of Android device to Windows principal machine, then enable the USB tethering in Android settings.

For iOS device, make sure to turn OFF showtime the Wifi. Connect the iOS device to Windows primary machine via USB lightning cable. Then switch ON the Cellular Information and Personal Hotspot and an option will pop-up and select USB Only.

Network Cable

The faster the network, the faster the display operation. Cablevision networks tend to accept ameliorate operation than wireless networks. The fastest option is always a direct connection via network cablevision, e.g. a Gigabit Ethernet.

Currently minimum reasonable network bandwidth needed by spacedesk BETA ranges around 50 Mbit/sec. Substantial improvements including support of slower networks are planned for the outset release version.

Android Debug Bridge Cablevision

There is no native ADB cable back up by spacedesk. However, advanced users can yet use ADB port forwarding.
This requires Android SDK platform tools downloaded on the main machine.
On Windows, open control prompt on the main machine and then alter the directory to your android SDK platform tools folder. Type this command: enter "adb reverse tcp:28252 tcp:28252"
On Android, become to spacedesk Viewer App, uncheck the LAN/WiFi discovery box below to disabled the automatic network discovery of the viewer app.
Then click the + push button and enter the IP address 127.0.0.1 to connect.

Annotation: "adb reverse" only works on devices with Android five.0-higher up version.

Screen Resolution

The lower the resolution of the networked display screen, the faster the display performance.

Color Depth and Prototype Compression

spacedesk uses image compression to improve brandish performance. This mechanism reduces image size before transferring images over the network. The spacedesk prototype pinch algorithm is lossy. It reduces quality and color depth of the image.
On fast networks, color depth and paradigm quality can exist kept very high while withal achieving expert functioning.
On slow networks, color depth and epitome quality need to exist reduced to achieve practiced functioning.

The "Compression Quality" dialog box of the Windows VIEWER Settings allows the user to enable or disable the pinch of screen updates. To cull OFF means to employ RGBA 32-flake color format of screen image and no epitome quality reduction will exist washed. To choose On means that the user allows to reduce color depth by Blush Downsampling and adjusts the compression quality to find the ideal prototype quality and performance speed.

YUV 4:4:iv – No reduction of color information. Loftier quality of screen prototype but, operation intensive. Tin can only be used on very fast networks

YUV iv:2:2 – Reducing the colour data by 1/3 (from 24 chip to 16bit) reducing colour quality of screen image and improving performance.

YUV 4:2:0 – Reducing the color information by 50% (from 24 flake to 12bit) to achieve all-time possible performance.

The color loss caused past the above mechanism typically non very much noticeable for the human being eye, especially when there is a lot of motion on the screen (e.thou. playing a video). Thus YUV: 4:ii:0 is the default setting which can apply to many user Applications.

The Image Quality tin can be varied between 100 (no pinch) and 0 (maximum possible compression). The default value is 70 which still tends to show a clear enough and detailed plenty image for many user applications.

Framerate per second

The framerate option allows user to cull the FPS (framerate per 2d) on the viewer screen.
On Windows viewer just go to Settings → Compression Quality … → Frame rate per second (FPS).
On Android viewer, simply go to Settings → Quality / Operation → Custom FPS charge per unit.
On iOS viewer, just go to Settings → Quality → Custom FPS rate

Uninstall on Windows Master Automobile

Uninstall Using Windows Control Panel

Uninstall of spacedesk tin can be done on Control Panel → Programs and Features.

Uninstall Using .Msi File

An alternative style to uninstall spacedesk is using the spacedesk msi installer file.

Footstep 1: Run the setup installer

Run the spacedesk setup installer.

spacedesk_driver_Win_10_32_v1040_BETA.msi for x86 platform
spacedesk_driver_Win_10_64_v1040_BETA.msi for x64 platform

Footstep ii: Click the remove button

After selecting the Remove push button, only click Next until it uninstallation completed.

Starting on version 0.9.9.z.25, reboot is not needed anymore in Windows 10 machine.

Pace 3: Reboot (Windows eight.1 only)

After the uninstallation has completed, reboot the computer before proceeding with any other task.

Note: Please practise not manually delete or remove the C:\Program Files\datronicsoft\ spacedesk folder and its files, to prevent uninstallation problem.

Troubleshooting Uninstall

Pace 1: Missing spacedesk program files.

Manually deleting spacedesk program files located in chosen directory folder (eastward.k. C:\Program Files\datronicsoft\spacedesk) is extremely not appropriate, doing and then may effect to uninstallation failure of spacedesk with an error message below.

To set the problem, just restore the program files (please check your Recycle bin)to its original location and endeavor to uninstall again using the same msi installer version or by Windows Command Panel → Programs and features.

Footstep 2:Try Microsoft Fix.

If uninstall problem withal persist subsequently restoring spacedesk program files, try the Install/Uninstall troubleshooter program from the Microsoft Gear up article. If spacedesk is not on the plan list, simply select "Not Listed" and so paste the product code of electric current spacedesk version beneath.

spacedesk_driver_Win_10_32_v1040_BETA.msi:{6863B8F6-1229-4AAF-85D7-7278AB1A5D00}
spacedesk_driver_Win_10_64_v1040_BETA.msi:{A7749853-C2A7-4313-B46F-11AECF983D62}
spacedesk_driver_Win_8.1_32_v1036_BETA.msi:{A3FD378F-3846-4E99-A7F0-54FF212E4B34}
spacedesk_driver_Win_8.1_64_v1036_BETA.msi:{D944408D-DD6D-447A-B707-92EB8141EA0F}

spacedeskWindowsVIEWER_v0937_BETA.msi:{44C237FF-E3B0-42EC-B6BD-E21A4D5A10D0}

for previous spacedesk version:
spacedesk_driver_Win_10_32_v1039_BETA.msi:{36A88680-F72C-420D-A7CF-2B6E3BB8C13A}
spacedesk_driver_Win_10_64_v1039_BETA.msi:{D06EA7A6-EBC0-421F-A8B4-4CC648E9219E}
spacedesk_driver_Win_10_32_v1038_BETA.msi:{60556EC1-A62B-42AE-B50D-0B3080B6827D}
spacedesk_driver_Win_10_64_v1038_BETA.msi:{A7D9E65C-8236-4D7A-9AE0-F28DDEF0D583}
spacedesk_driver_Win_10_32_v1037_BETA.msi:{C2DE53FC-DA90-4A04-AE25-880F99D712A0}
spacedesk_driver_Win_10_64_v1037_BETA.msi:{599DEADB-A437-4A08-9187-BB2D3E6A76AC}
spacedesk_driver_Win_10_32_v1036_BETA.msi:{4BF61DED-156D-47A4-91B8-95F7CD26F902}
spacedesk_driver_Win_10_64_v1036_BETA.msi:{F9B74421-732C-417E-AFFF-C840D373D287}
spacedesk_driver_Win_10_32_v1035_BETA.msi:{3A1901EC-6398-4E19-AD56-58390CEE99CB}
spacedesk_driver_Win_10_64_v1035_BETA.msi:{8674C274-85BB-418B-84BC-71AE4D7E5EFE}
spacedesk_driver_Win_10_32_v1034_BETA.msi:{1D9847E1-861E-4765-B991-A368F8DC58B2}
spacedesk_driver_Win_10_64_v1034_BETA.msi:{0B6AE17A-CE3D-4754-982A-72A0E81C63EF}
spacedesk_driver_Win_10_32_v1033_BETA.msi:{C2B5D45E-9146-4CEB-96E5-3441E356CF92}
spacedesk_driver_Win_10_64_v1033_BETA.msi:{A3F7D2C7-F3B2-40CD-B236-37BA2CDACA1D}
spacedesk_driver_Win_10_32_v1032_BETA.msi:{FABB19B6-1BE9-4B31-96ED-3F500CAA08FC}
spacedesk_driver_Win_10_64_v1032_BETA.msi:{08D19CA0-C629-4FEF-9F5E-E686B9BD509A}
spacedesk_driver_Win_10_32_v1031_BETA.msi:{9CA2526E-34D0-46EC-A9D9-B0FA3032EE8A}
spacedesk_driver_Win_10_64_v1031_BETA.msi:{2640B056-E362-4D7E-8FFF-318BCBD16754}
spacedesk_driver_Win_10_32_v1030_BETA.msi:{6839C864-2613-4ECF-B964-859D5F43CB89}
spacedesk_driver_Win_10_64_v1030_BETA.msi:{FA2ABC07-9DF6-4863-A7A6-F9FF43C1EF63}
spacedesk_driver_Win_10_32_v1029_BETA.msi:{412778F0-1ABC-4646-8BB6-1A75B9C8A198}
spacedesk_driver_Win_10_64_v1029_BETA.msi:{05378534-75A7-4C2E-AD34-AED11788E313}

spacedesk_driver_Win_8.1_32_v1035_BETA.msi:{C8F03123-AD56-4203-8744-4C9F281128A9}
spacedesk_driver_Win_8.1_64_v1035_BETA.msi:{769FA542-B6E2-41B1-B310-51F74D775CA5}
spacedesk_driver_Win_8.1_32_v1034_BETA.msi:{1FF2B33F-DE6B-4F5A-A7AF-C88AE5A218B9}
spacedesk_driver_Win_8.1_64_v1034_BETA.msi:{284A27A0-97C2-423D-9167-A7FCEAEEE5B3}
spacedesk_driver_Win_8.1_32_v1033_BETA.msi:{B4B0A476-1878-4E6A-A0E8-ECF240E23FDD}
spacedesk_driver_Win_8.1_64_v1033_BETA.msi:{4DC994AB-529A-4899-BAF7-37DB3B911481}
spacedesk_driver_Win_8.1_32_v1032_BETA.msi:{6DD0D79F-5B05-4C8B-AE26-DEBBE50D7CDF}
spacedesk_driver_Win_8.1_64_v1032_BETA.msi:{44417365-2F3A-4B97-8C47-322003A44292}
spacedesk_driver_Win_8.1_32_v1027_BETA.msi:{87A725A9-F83F-48D9-AEAE-08C86569EFF8}
spacedesk_driver_Win_8.1_64_v1027_BETA.msi:{F2ED3BFB-279B-439F-91C0-A316872AB928}
spacedesk_driver_Win_8.1_32_v1020_BETA.msi:{D36AC41F-8329-4899-8CDF-C132FC26FED0}
spacedesk_driver_Win_8.1_64_v1020_BETA.msi:{D51DBA31-4227-45D7-AB1F-BAD397C38F43}
spacedesk_driver_Win_8.1_32_v1018_BETA.msi:{20ACD8D5-FF4D-43CB-A7E8-641E0AE88254}
spacedesk_driver_Win_8.1_64_v1018_BETA.msi:{91103F10-6432-4D27-979C-9CF3D73862E0}

spacedeskWindowsVIEWER_v0936_BETA.msi:{CD4ED882-8D1C-4D4F-AE41-C0A6CC050F8E}
spacedeskWindowsVIEWER_v0935_BETA.msi:{9DD48E99-0D24-4D00-8398-0AD582D6C291}
spacedeskWindowsVIEWER_v0934_BETA.msi:{143FB0AF-6EBD-4A83-98AA-804C35F01797}
spacedeskWindowsVIEWER_v0933_BETA.msi:{DB3B027C-8D15-4FC6-83BB-9743EFB3795B}

Step three: Manual uninstall of drivers and services

After successfully troubleshooting uninstall, spacedesk should exist removed from "Programs and Features". To make sure that drivers and services are comprehensively removed, all the steps in the adjacent section "Transmission uninstall" need to be executed.

Manual Uninstall (Troubleshooting Only)

The steps in this chapter should only be done in infrequent cases if needed and if previously discussed with spacedesk support. The regular way to uninstall spacedesk is using Windows Control Panel or the spacedesk msi installer file equally described above.

Step 1: Uninstall services

Run a Command Prompt (cmd.exe) "as administrator" and enter the following commands below:

  • sc delete spacedeskHookKmode (for Windows 8.1 only)
  • sc stop spacedeskService
  • sc delete spacedeskService
Stride two: Uninstall spacedesk Graphics Adapter (for Windows 10 only)

For Windows ten operating systems, manually uninstall spacedesk Graphics Adapter in Device Manager. This merely applies on spacedesk commuter version 0.9.9.z.25 – later.

Step 3: Uninstall spacedesk Mouse and Keyboard drivers (for Windows viii.1 but)

Manually uninstall the spacedesk Mouse and Keyboard driver on Device Managing director.

Footstep iv: Uninstall spacedesk virtual HID Device (for Windows 10 only)

On device manager click View -> Devices by Connexion, then find the spacedesk virtual HID Device.
Before uninstalling the spacedesk virtual HID Device, the children below should be uninstall first.
Just right-click each child devices underneath the spacedesk virtual HID Device, so click "Uninstall device".

Step 5: Uninstall spacedesk virtual Bus Device (for Windows 10 simply)

On device director click View -> Devices by Connectedness, then observe the spacedesk virtual Coach Device.
Just correct-click, then "Uninstall device".

Step 6:Reboot

Reboot the system and ensure that the following registry keys below accept been removed:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\spacedeskService
HKEY_LOCAL_MACHINE\Organization\CurrentControlSet\Services\spacedeskKtmInputKeybd  (for Windows viii.one just)
HKEY_LOCAL_MACHINE\Organisation\CurrentControlSet\Services\spacedeskKtmInputMouse

For Windows 8.one
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\spacedeskHookKmode

For Windows x
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\WUDF\Services\spacedeskDisplayUmode

Step vii:Delete files

Delete all files listed in the appendix of this certificate underneath "File listing" in the Appendix of this certificate.

Windows Secondary Car Uninstall

Uninstallation of Windows VIEWER on Secondary Car tin be done on Command Console → Programs and Features. Some other way to uninstall is past using the msi installer.

Note: If these troubleshooting procedures does not solve your problem please contact our spacedesk support, just click here.

Appendix

Release Notes

spacedesk Windows x/xi Driver version 1.0.40
– Potential bug set for BSOD during installation.
– Issues set for BSOD in Bus commuter .

spacedesk Windows eight.1 Driver version ane.0.36
– Improved spacedeskSetup log tracing.
– same binaries as 1.0.35 (only the installer is updated)

spacedesk Windows 7 Viewer version 0.9.37
– Bug fix hang on server side with sound enabled.

List of Incompatible Windows Awarding

This merely applies on Windows 8.ane Principal Motorcar.

Applications conflicting and causing system instability while spacedesk is active

Skype for business organisation
Fortinet security software
Flight Simulator

Applications not working in full screen style on spacedesk display monitor

Various DirectX games (e.yard. Witcher ii, Project Cars, Asseto Corsa, Battleground, etc.)

File List

File list (Windows 10)

C:WindowsSystem32driversUMDFspacedeskDriverHid.dll
C:WindowsSystem32driversUMDFspacedeskDisplayUmode1_0.dll (for Windows 10 version 1607 – 1703)
C:WindowsSystem32driversUMDFspacedeskDisplayUmode1_2.dll (for Windows 10 version 1709 – above)
C:WindowsSystem32driversspacedeskDriverAudio.sys
C:WindowsSystem32driversspacedeskKtmInputMouse.sys
C:WindowsSystem32driversspacedeskDriverBus.sys
C:WindowsSystem32spacedeskService.exe
C:WindowsSystem32spacedeskSrvLibConnectorUsb.dll
C:WindowsSystem32spacedeskServiceTray.exe
C:WindowsSystem32spacedeskConsole.exe

File list (Windows eight.1)

C:WindowsSystem32driversspacedeskHookKmode.sys
C:WindowsSystem32driversspacedeskKtmInputMouse.sys
C:WindowsSystem32driversspacedeskDriverBus.sys
C:WindowsSystem32spacedeskHookUmode.dll
C:WindowsSystem32spacedeskService.exe
C:WindowsSystem32spacedeskKtm.dll
C:WindowsSystem32spacedeskSrvLibConnectorUsb.dll
C:WindowsSystem32spacedeskServiceTray.exe

Files on 64 bit systems only

C:WindowsSysWOW64spacedeskHookUmode.dll

cookdincovizincy.blogspot.com

Source: https://www.spacedesk.net/user-manual/

Post a Comment for "Some Files Necessary for Setup Are Not Installed Run Setup Again From the Software Cd rom Epson 420"